This is an old revision of the document!
Table of Contents
macroCT
X-Ray Source
PSX10-WB-130 Microfocus Source
- 20kV-130kV targe voltage
- 0.356mA@45kV 0.123mA@130kV beam current
- 7µm@4W - 21µm@16W focal spot on tungsten target
- 115° cone angle
- 0.51mm Beryllium window
Detectors
Dexis Platinum / GXS-700
- SN: 0104430711
- 19.5µm x 19.5µm Pixels
- 1324×1692 Resolution
- Sensor Firmware Version: 0.5.10, 0.3.6, 0.4.5
- CPLD Version: 3.3.0.0
- API Version: 1.0.10.0
- VID 5328 PID 2010
- SN: 1093330312
- 19.5µm x 19.5µm Pixels
- 1552×1040 Resolution
https://nucwiki.org/wiki/index.php/GXS700_FOSS
https://nucwiki.org/wiki/index.php/Gendex_GXS700
Dexela
paxScan
Mechanics
Stepper Motors
GRBL
ATmega2560 on /dev/ttyUSB0
https://github.com/gnea/grbl/wiki/Grbl-v1.1-Configuration
http://eleccelerator.com/fusecalc/fusecalc.php?chip=atmega2560
Settings
$0=10 $1=254 $2=0 $3=0 $4=0 $5=1 $6=0 $10=1 $11=0.020 $12=0.002 $13=0 $20=0 $21=1 $22=1 $23=0 $24=100.000 $25=500.000 $26=250 $27=5.000 $30=12000 $31=550 $32=0 $100=160.000 $101=160.000 $102=160.000 $103=160.000 $110=600.000 $111=600.000 $112=600.000 $113=600.000 $120=40.000 $121=40.000 $122=40.000 $123=40.000 $130=400.000 $131=400.000 $132=400.000 $133=400.000 ok ok <Idle|MPos:0.000,-100.000,-100.000,0.000|FS:0,0|Pn:AVB> ok ok <Idle|MPos:0.000,-100.000,-100.000,0.000|FS:0,0|Pn:AUB> ok ok <Idle|MPos:0.000,-100.000,-100.000,0.000|FS:0,0|Pn:AUVB> ok ok ok ok S0;0;0;0; ok ok S0;0;0;0; ok ok S0;0;0;0; ok ok S0;0;0;0; ok ok S0;0;0;0; ok ok S0;0;0;0; ok ok S0;0;0;0; $0=10 $1=254 $2=0 $3=0 $4=0 $5=1 $6=0 $10=1 $11=0.020 $12=0.002 $13=0 $20=0 $21=1 $22=1 $23=0 $24=100.000 $25=500.000 $26=250 $27=5.000 $30=12000 $31=550 $32=0 $100=160.000 $101=160.000 $102=160.000 $103=160.000 $110=600.000 $111=600.000 $112=600.000 $113=600.000 $120=40.000 $121=40.000 $122=40.000 $123=40.000 $130=400.000 $131=400.000 $132=400.000 $133=400.000