• 20kV-130kV targe voltage
• 0.356mA@45kV 0.123mA@130kV beam current
• 7µm@4W - 21µm@16W focal spot on tungsten target
• 115° cone angle
• 0.51mm Beryllium window

On /dev/ttyS3 with 3840bps 8N1

• SN: 0104430711
• 19.5µm x 19.5µm Pixels
• 1324×1692 Resolution
• Sensor Firmware Version: 0.5.10, 0.3.6, 0.4.5
• CPLD Version: 3.3.0.0
• API Version: 1.0.10.0
• VID 5328 PID 2010

• SN: 1093330312
• 19.5µm x 19.5µm Pixels
• 1552×1040 Resolution

https://nucwiki.org/wiki/index.php/GXS700_FOSS

https://nucwiki.org/wiki/index.php/Gendex_GXS700

https://nucwiki.org/wiki/index.php/Gendex_GXS700_Dump

https://github.com/JohnDMcMaster/gxs700

Channels

• 0: Chamber Light
• 1: Alignment Laser Vertical
• 2: Alignment Laser Horizontal
• 3: (unused)
• 4: Case Fan 1
• 5-15: (unused)

Channels:

• 0: Stepper Motor Supply
• 1: (unused)
• 2: (unused)
• 3: (unused)
• 4: (unused)
• 5: (unused)
• 6: (unused)
• 7: (unused)
• 8: Tube Supply
• 9: (unused)
• 10: Software E-Stop
• 11: Safety Start
• 12: Software Power Interlock
• 13: Software Chamber Interlock
• 14: 15V Detector Supply
• 15: 24V Detector Supply

ATmega2560 on /dev/ttyUSB0

https://github.com/gnea/grbl/wiki/Grbl-v1.1-Configuration

http://eleccelerator.com/fusecalc/fusecalc.php?chip=atmega2560

$0=10
$1=254
$2=0
$3=0
$4=0
$5=1
$6=0
$10=1
$11=0.020
$12=0.002
$13=0
$20=0
$21=1
$22=1
$23=0
$24=100.000
$25=500.000
$26=250
$27=5.000
$30=12000
$31=550
$32=0
$100=160.000
$101=160.000
$102=160.000
$103=160.000
$110=600.000
$111=600.000
$112=600.000
$113=600.000
$120=40.000
$121=40.000
$122=40.000
$123=40.000
$130=400.000
$131=400.000
$132=400.000
$133=400.000